Clinical Research Directory
Browse clinical research sites, groups, and studies.
Patient Satisfaction and Prosthetic Complications of Three Different Prostheses for Rehabilitation of Atrophied Maxilla Using All-on-4 Concept
Sponsor: Delta University for Science and Technology
Summary
The purpose of this cross-over clinical study is to evaluate and compare patient satisfaction and prosthetic complications associated with three different types of implant-supported prostheses used for the rehabilitation of completely edentulous atrophied maxillae following the All-on-4 treatment concept. Participants with a severely resorbed upper jaw will receive four dental implants placed according to the All-on-4 protocol. Each participant will sequentially wear three different prosthetic designs over defined follow-up periods. At the end of each period, patient satisfaction will be assessed using standardized questionnaires, and any mechanical or prosthetic complications will be recorded and compared among the three prosthetic designs.
Official title: Patient Satisfaction and Prosthetic Complications of Three Different Prostheses for Rehabilitation of Atrophied Maxilla Using All-on-4 Concept: A Cross Over Study
Key Details
Gender
All
Age Range
55 Years - 65 Years
Study Type
INTERVENTIONAL
Enrollment
18
Start Date
2024-12-10
Completion Date
2026-08-20
Last Updated
2026-11-19
Healthy Volunteers
Yes
Conditions
Interventions
A screw-retained Computer-Aided Design and Computer-Aided Manufacturing CAD/CAM titanium framework with monolithic zirconia teeth
A Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) titanium framework with monolithic zirconia teeth fixed prosthesis screw-retained onto four multi-unit abutments placed according to the All-on-4 concept in the completely edentulous maxilla. Participants will wear this prosthesis for a period of \[6 months\] before crossing over to the next prosthetic design.
A screw-retained Computer-Aided Design and Computer-Aided Manufacturing CAD/CAM polyetheretherketone framework with composite resin teeth
A Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) polyetheretherketone (PEEK) framework with composite resin teeth fixed prosthesis screw-retained onto four multi-unit abutments placed according to the All-on-4 concept in the completely edentulous maxilla. Participants will wear this prosthesis for a period of \[6 months\] before crossing over to the next prosthetic design.
A Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) titanium milled bar overdenture with polyetheretherketone (PEEK) housing and acrylic resin teeth
Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) titanium milled bar overdenture with polyetheretherketone (PEEK) housing and acrylic teeth onto four multi-unit abutments placed according to the All-on-4 concept in the completely edentulous maxilla. Participants will wear this prosthesis for a period of \[6 months\] before crossing over to the next prosthetic design.
Locations (1)
Faculty of Dentistry, Mansoura University
Al Mansurah, Egypt